GO-RP2350-CB04T04 is an I/O board that carries a 2-inch RP2350 touch LCD module. It has two digital inputs, two relay outputs, four analog inputs, RS-485 and Ethernet.

GO-RP2350-CB04T04 board with AD inputs and relay outputs

Specifications

ItemSpecification
ModelGO-RP2350-CB04T04
CPURP2350 (touch LCD module)
Display2-inch touch LCD
Input power24 V DC
Digital inputs2 optocoupler inputs
Digital outputs2 relay contacts, separate COM per output
Analog inputs4 differential channels, 16-bit ADC (MCP3428)
SerialRS-485 terminal CH1
EthernetW5500, RJ45
Expansion interfaceI²C
Board size72 × 87 mm

Main board pin map

FunctionChannel or signalGPIO
Digital inputIN01GP8
Digital inputIN02GP9
Relay outputOUT1GP10
Relay outputOUT2GP11
CH1TXGP0
CH1RXGP1
EthernetSCKGP2
EthernetCSGP3
EthernetMISOGP4
EthernetMOSIGP5
EthernetINTGP21
EthernetRESETGP22
I²CSDA1GP6
I²CSCL1GP7
I²CRST1GP23

Analog inputs AD1 to AD4 are MCP3428 channels CH1 to CH4, read over the I²C bus on GP6 and GP7. The expansion connector shares this bus. GP12, GP13, GP15 to GP20 and GP29 are used by the module’s LCD and touch controller. GPIO numbers do not specify terminal voltage ratings or physical connector pin numbers.

See the motor temperature monitor built with Senbrino for an application of this board.