Guides
Product introductions, setup notes, and troubleshooting guides for SENBRINO.
4posts
GuidesSENBRINOWire power and buttons, then pick the main board and port in a new project. Inputs are P0 to P3, outputs P4 to P7. The addresses Part 3 uses are set here.
GuidesSENBRINOOne line in the Claude console, six symbols and four rungs come back, then Deploy and Monitor. Press the button and a relay clicks. Three seconds later the second one follows.
GuidesSENBRINOFrom Senbrino-win-Setup.exe to the first start screen. Get the PC side ready before the GO-RP2040-CB08 board comes in Part 2.
GuidesSENBRINOWrite your program in the ladder language PLC engineers already know, and Senbrino turns it into Arduino C++ and puts it on the board. A tour of the ladder editor, symbols, board packages, live monitoring, Modbus and AI integration.