
GO-DIRECT-MAIN Specifications
GO-DIRECT-MAIN specs for stage control at small venues: RP2040, Ethernet, two RS-485 channels, three isolated inputs and two I²C buses.
Posts related to Senbrino across categories.
10 posts · Page 1 of 1

GO-DIRECT-MAIN specs for stage control at small venues: RP2040, Ethernet, two RS-485 channels, three isolated inputs and two I²C buses.

GO-RP2350-CB04T04 specifications: RP2350 touch LCD module, two digital inputs, two relay outputs, four 16-bit analog inputs, RS-485 and Ethernet.

GO-RP2040-CB08 specifications: RP2040, four digital inputs, four relay outputs, analog I/O, RS-485 and SPI/I²C expansion.

PICO-IO8R specifications: RP2040, four digital inputs, four relay outputs, RS-232C and RS-485, DC 12 to 24 V power, operating conditions and GPIO assignments.

The controller for a machine that presses grain in a hot mold and pops it open into a snack. Board package, ladder layout, and the issues we hit along the way.

Wire power and buttons, then pick the main board and port in a new project. Inputs are P0 to P3, outputs P4 to P7. The addresses Part 3 uses are set here.

One line in the Claude console, six symbols and four rungs come back, then Deploy and Monitor. Press the button and a relay clicks. Three seconds later the second one follows.

Temperature inputs, relay outputs, Modbus communication and a touch LCD in a motor temperature monitor built with Senbrino.

From Senbrino-win-Setup.exe to the first start screen. Get the PC side ready before the GO-RP2040-CB08 board comes in Part 2.

Write your program in the ladder language PLC engineers already know, and Senbrino turns it into Arduino C++ and puts it on the board. A tour of the ladder editor, symbols, board packages, live monitoring, Modbus and AI integration.